How Do I Chang The Oil And Filter On A John Deere X590 Garden Tractor

MC519 Cart with Power Flow™ blower and chute

MC519 Cart

The MC519 is compatible with Select Series™ X320, X324, X340, X360, X380, X384, X390, X394, X500 Series Multi-Terrain, X700 Series Tractors, GT200, GX300, X400, and X500 Heavy-Duty Garden Tractors, and 110 through 455 Garden Tractors.

NOTE: MC519 is not compatible with D100 Series, LA100 Series, L100 Series, 100 Series, or Select Series model X300, X304, X310, X330, X350, X354, X370 Tractors, LT, LX, or SST Lawn Tractors, or G100 or G110 Garden Tractors.

The MC519 is designed to provide the versatility of two products in one - a utility cart or a material collector.

Utility cart:

7.5 cu ft (212 L) heaped or 500 lb (227 kg) of capacity
Ideal for hauling topsoil, gravel, sand, firewood, mulch, etc.

Collector:

Large, 19-bu (23-cu ft, 670-L) capacity with a standard equipment cover
Can be equipped with a Power Flow blower and chute for vacuuming grass clippings, thatch, pine needles, and leaves

Potential customers include homeowners, commercial operators, nurseries, and estates.

Easy to hook up and operate

MC519 hitch

The MC519 hitch can be connected to the tractor without tools in about one minute.

In combination with non-jackknifing caster wheels, this semi-rigid hitch makes it easy to maneuver the cart/collector.

An easy-to-reach handle allows dumping the cart/collector from the tractor seat.

For dumping extra-heavy loads, the operator can use the hand grip on the front of the box.

Standard equipment cover

A standard equipment cover can be installed in a matter of seconds to convert the utility cart to a collector:

Large plastic window in the cover allows the operator to see when the collector is full.
Cover folds flat for space-saving wall storage.

Strong construction

MC519 Cart Bagger

The MC519 has the durability to handle homeowner or commercial applications:

Steel support structure is mig-welded for strength.
Cart box is made of strong, 18-gauge, 0.05-in. (1.2-mm) steel for durability.
Puncture-resistant 4-ply rated (PR) turf tires are standard equipment.
Greaseable bearings (wheels and casters) enable long life.
Cover is made of tough 14-oz (397-g) black vinyl-coated nylon. The lower sides are made of 9.5-oz (269-g) black polyester knitted cloth.

Power Flow™ option (Power Flow blower and discharge chute must be ordered separately)

Power Flow blower and discharge chute options

When equipped with the optional blower and discharge chute (ordered separately), the MC519 becomes a material collection system.

The blower housing material is high-density polyethylene and the fan material is ultra-high molecular weight polyethylene:

Lightweight for easy handling and minimal effect on mowing smoothness
Will not rust or corrode
Resists wear and abrasion caused by sand
Contoured design for clean appearance and smooth grass flow

Specifications

Capacity
Collector
Volume	19 bu (670 L) or 23 cu ft (0.67 m³)
Load	500 lb (226.8 kg)
Cart
Volume	7.5 cu ft (0.21 m³) heaped; 6 cu ft (0.17 m³) struck
Load	500 lb (226.8 kg)
Box dimensions
Width	42 in. (107 cm)
Length	30 in. (76 cm)
Depth	8 in. (20 cm)
Overall dimensions, including hitch
Width	45.5 in. (116 cm)
Length	51 in. (129.5 cm)
Depth	44 in. (112 cm)
Clearance	10 in. (25 cm)
Dump angle	50 degrees
Weight, shipping (with carton)	176 lb (80 kg)
Weight, net
Cart only	119 lb (54 kg)
Cover only	26 lb (12 kg)
Hitch only	7.7 lb (3.47 kg)
Power Flow™ dimensions
Fan diameter	13 in. (334 mm)
Fan width	2.75 in. (70 mm), 3.75 in. (95 mm) for C Series Blowers
Fan blades	4, 5 for C Series Blowers
Fan speed	3400 (will vary with mower width)
Tires	4.10x3.50 4PR
Bearings
Wheel	Iron/Oilite™ with grease fittings
Caster	Roller ball with urethane seals and grease fittings
Box material	18-gauge, 0.05-in. (1.2-mm) steel
Cover material	14-oz (0.4-kg) black vinyl-coated nylon top, front, and upper side flaps 9.5-oz (0.27-kg) black polyester knitted cloth lower sides 0.397-sq yd (0.33-m²) knitted polyester netting

Oilite is a trademark of Beemer Precision Incorporated.

Tractor compatibility and requirements

The MC519 Cart is compatible with the following tractors with 48A and 54A Accel Deep™ Decks, 38, 46, 48, 48C Convertible, 48 Edge™ Xtra Deck, 50-, 54-, 54C Convertible, 54 Edge Xtra Deck, 60, 60-in. (152-cm) 7-Iron™, 62C Convertible, 62 Edge Xtra Deck, or 54-in. (137-cm), or 60-in. (152-cm) High-Capacity (HC) mowers:

110 and 112 Tractors (SN 100,000 and above)
200, 210, 212, 214 and 216, GT242, GT262, GT275, GT225, GT235, GT235E, GT245, 240, 245, 260, 265, 285, 320, 325, 335, 345, 355D, GX255, GX325, GX335, GX345, and GX355 Tractors
Select Series™ X320, X324, X340, X360, X380, X384, X390, and X394 Tractors
X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors
316, 318, 322, and 332 Tractors
NOT compatible with 100, L100, LA100, D100, LT, LX, X300, X304, X310, X330, X350, X354, X370, or SST Series Lawn Tractors or G100 or G110 Garden Tractor
NOT compatible with 316-332, 325-355D, GX325-GX355 Series Tractors with a 38-in. (97-cm) mower and blower assembly or 38-in. (97-cm) QT blower assembly
420 and 430
425, 445, and 455
X465, X475, X485, X495, X575, X585, and X595 Heavy-Duty Garden Tractors (HDGT's)
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758
NOT compatible with tractors (X400/X500 HDGT's or X700 Tractors) that have the 3-point hitch or 540 power take-off (PTO) shift arm attached
325/345 with 38-in. (97-cm) mower and Power Flow system requires M118053 arm

Requirements and/or recommendations:

1. Four 200 lb (91 kg) cast-iron rear wheel weights are recommended for ballast on GT242, GT262, GT275, GT225, GT235, GT245, 240, 245, 260, 265, 285, 320, 325, 335, 345, 355D, GX325, GX335, GX345, GX355, X500, X520, X534, and X540 Tractors when operating on slopes. Select Series X320, X324, X340, X360, X380, X384, X390, and X394 Tractors may need ballast to increase traction, stability, or steering, especially when operating on hillsides or if carrying heavier materials in the MC519 Cart.
2. 420 and 430 Tractors require one AM118915 60-in. (152-cm) Power Flow installation kit for mounting 60-in. (152-cm) Power Flow blower.
3. 316, 318, 322, 330, 332, 420, 430 require black hitch mounting bracket M115521.

Required on MC519 (S/N 045001 - ) to mount on the following Tractors:

316, 318, 322, 330, 332, 420, and 430
425 Two Wheel Steer (- A040774) without 3-Point Hitch
425 All Wheel Steer (- B040203) without 3-Point Hitch
445 (- C040542) without 3-Point Hitch
455 Two Wheel Steer (- C040507) without 3-Point Hitch
455 All Wheel Steer (- D040074) without 3-Point Hitch

This bracket was included in older MC519's but was eliminated when the 425, 445 and 455 Tractors hitch design was changed and the bracket was no longer required for hookup.

4. GT, 300 and GX 48C Mowers built before April 2002 may need 0.5-in. (13-mm) hole drilled in mower wheel bracket for installing BM20667 or BM21495 48C HP Blower. See Service Information Bulletin 02-11-45-7 for detailed instructions.

5. GT, 300 and GX 48C Mowers built after April 2002 may need slot added to mower wheel bracket for installing BM19439 and BM20523 QT Blower. See Service Information Bulletin 02-11-45-7 for detailed instructions.

6. X400/X500 HDGT's and X700 Ultimate Tractors require LP52039 Adaptor Kit for MC519 Cart, available from Order Zone.

7. X400/X500 HDGT's and X700 Ultimate Tractors with a 48C/48X Mower require BM20976 or BM22798 48 HP Adapter Kit to install BM20667 48C High-Performance Power Flow Blower Assembly to accommodate this mower's rotatable wheels:

One BM20976 48C/48X High Performance Blower Assembly Adapter Kit is required to install the BM20667 48C HP Power Flow Blower on a 48C or 48X Mower Deck (SN -050588) with wheels that rotate.
One BM22798 48C/48X High Performance Blower Assembly Adapter Kit is required to install the BM20667 48C HP Power Flow Blower on a 48X Mower Deck (SN 050589- ) with wheels that rotate.

8. The following older 425, 445, and 455 Tractors without a 3-point hitch also require black hitch mounting bracket M115521:

425 two-wheel steer (A040774 and below)
425 all-wheel steer (B040203 and below)
445 (C040507 and below)
455 two-wheel steer (C040507 and below)
455 all-wheel steer (D040074 and below)

9. BM20668 54C and BM20669 62C HP Power Flow Blowers require one AM133822 Mower Wheel Adjustment Pin for installation on 2004 and later 54C or 62C Mowers.

NOTE: In order to be used as a material collection system, an optional Power Flow blower and discharge chute must be ordered in addition to the LP49228 MC519 Material Collection System.

Ordering information

Customers, please contact a local John Deere dealer for availability and pricing information.

MC519 Material Collection System
Order number: LP49228